Engines

12.90 Pea Shooter

8.90 Sniper Jr.

7.90 Sniper Lite 3.25"

7.90 Sniper Lite 3.50"

7.90 Sniper Heavy 3.50"

7.90 Sniper Extreme

Magnum Series Clone

 

 

Packages

12.90 Pea Shooter

8.90 Sniper Jr.

7.90 Sniper Lite 3.25"

7.90 Sniper Lite 3.50"

7.90 Sniper Heavy 3.50"

7.90 Sniper Extreme

 

 

Clutches

Holeshot Series

Black Widow

Clutch Components

Ramps

Helixes

 

 

Turn-Key Racecar

The HP Difference

HP Assassin Turn-Key Cars

 

 

 

Components

Carburetor

Clutch

Racecar

 

 

New Inventory

Used

Apparel

Racers

FAQ

Contact

 

 

We at Huddleston Performance are proud to bring to you our Magnum Series Engines. In today's economic state we recognize the need for a more cost effective alternative for your racing needs. Rising fuel cost, rising parts cost, and an unstable market are putting racers in tough positions. The Magnum Series Engine is here to help alleviate some of the stress created from your racing operation. The Magnum Series currently consists of multiple engines to help people get started in Jr. Racing.

 

The first engine within the Magnum Series is our Clone Engine. This combination is a great "starter" engine for anybody looking to get their feet wet in the Jr. Sport. Although this engine is an OHV design, limiting its NHRA and IHRA usability, it is an outstanding low dollar route for new racers to use at many local tracks throughout the country. The Magnum Series Clone is available in 3 different configurations.

 

Configuration 1:  Stock Magnum Series Clone Engine - $299 (YES $299!!)

This configuration is a bone stock engine. It still has the stock internal components, stock external components with the exception of a Billet Flywheel, ARC Top Plate, Walbro Fuel Pump, Header, Air Filter Adapter, and 3' of Fuel Line. For someone looking to gauge their kids interest in Jr. Racing this is a good alternative.

(We do not offer this engine with the stock flywheel due to the safety hazard created by the magnets.)

 

Configuration 2: Intermediate Magnum Series Clone Engine - $699

This configuration has many longevity upgrades from the Stock Magnum Series Clone. The Intermediate has an aftermarket Billet Rod, Billet Flywheel, Aftermarket Cam, Aftermarket Valve Springs, ARC Top Plate, Walbro Fuel Pump, Header, Air Filter Adapter, 3' of Fuel Line, and is Professionally Assembled by the same hands that bring you the Sniper Series Engines. This combination is great for new racers looking to put a lot of runs on their drivers.

 

Configuration 3: Pro Magnum Series Clone Engine - $949 Introductory Price

This configuration is a full race ready engine. It comes with the aftermarket Billet Rod, Bille\t Flywheel, Aftermarket Cam, Aftermarket Valve Springs, Billet Intake Manifold, 28 mm Carburetor, ARC Top Plate, Walbro Fuel Pump, Header, Air Filter Adapter, 3' of Fuel Line, and is Professionally Assembled by the same hands that bring you the Sniper Series Engines. This combination is capable of E.T.'s in the mid to low 10 seconds range.

 

All 3 of these combinations are great ways for new racers to decide if the sport of Jr. Dragster racing is for them. These motors give racers the opportunity to test the waters without spending a fortune at many of their local tracks throughout the country. In addition to these motors, racers can also purchase these motors with a complete clutch set-up for only $600 above the engine cost. That makes the Stock Package $899, Intermediate Package $1,199, and Pro Package $1,549. If your new to Jr. Racing or looking for a cost effective method of racing call us today!

 

***These motors are not currently NHRA/IHRA accepted.